 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| !Note * This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. P16E.pdf 10.12.7 Ceramic Resonators (CERALOCKr) Cat.No.P16E-20 !Note * This PDF catalog is downloaded and !CAUTION (for storage, operating, rating,ltd. Therefore, it's specifications are subject to change or oursmoking and/or burning, etc. !Note * Please read rating from the website of Murata Manufacturing co., soldering, mounting and handling) in this catalog to prevent products in it may be discontinued without advance notice. Please check with our sales representatives or product engineersspecifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This catalog has only typical before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. P16E.pdf 10.12.7 for EU RoHS Compliant * * * All the products in this catalog comply with EU RoHS. EU RoHS is "the European Directive 2002/95/EC on the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment". For more details, please refer to our website 'Murata's Approach for EU RoHS' (http://www.murata.com/info/rohs.html). !Note * This PDF catalog is downloadedand !CAUTION (forMurata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our !Note * Please read rating from the website of storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. P16E.pdf 10.12.7 CONTENTS Selection Guide Part Numbering 1 1 CERALOCKr, CERALOCK(R) and "CERALOCK" in this catalog are the trademarks of Murata Manufacturing Co., Ltd. 2 2 3 5 7 MHz Chip Type -Tight Frequency Tolerance for AutomotiveApplication Circuits Utilization 3 2 MHz Chip Type -Standard Frequency Tolerance for AutomotiveApplication Circuits Utilization 8 12 13 Notice for Automotive Packaging for Automotive 3 MHz Chip Type -Tight Frequency Tolerance for General UsageApplication Circuits Utilization 4 18 20 23 4 MHz Chip Type -Standard Frequency Tolerance for General UsageApplication Circuits Utilization 5 24 29 31 33 35 5 6 7 MHz Lead Type -Standard Frequency Tolerance for General UsagekHz Chip Type -Standard Frequency Tolerance for General UsagekHz Lead Type -Standard Frequency Tolerance for General Usage- 6 Notice for General Usage MHz Chip Type MHz Lead Type kHz Chip Type kHz Lead Type 37 42 43 45 7 Packaging for General Usage MHz Chip Type MHz Lead Type kHz Type 47 50 52 !Note * This PDF catalog is downloadedand !CAUTION (forMurata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our !Note * Please read rating from the website of storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. P16E.pdf 10.12.7 Selection Guide Applications Automotive Tight Tolerance SMD Consumer Tight Tolerance SMD Standard Tolerance SMD Standard Tolerance SMD kHz Range CSTCR_G15C 4.00-7.99MHz CSTCC_G_A 2.00-3.99MHz CSTCR_G15L 4.00-7.99MHz CSTCC_G 2.00-3.99MHz CSBFB_J 430-519kHz CSTCE_G15C 8.00-13.99MHz CSTCR_G_B 4.00-7.99MHz CSTCE_G15L 8.00-13.99MHz CSTCR_G 4.00-7.99MHz CSBFB_J 700-1250kHz CSTCE_V13C 14.00-20.00MHz CSTCE_G_A 8.00-13.99MHz CSTCE_V13L 14.00-20.00MHz CSTCE_G 8.00-13.99MHz The kHz resonators have only two terminals. CSTCE_V_C 14.00-20.00MHz CSTCW_X11 20.01-48.00MHz CSTCE_V 14.00-20.00MHz CSTCV_X_Q 20.01-70.00MHz CSTCW_X 20.01-70.00MHz CSACV_X_Q 20.01-70.00MHz (Two Terminals) CSACW_X 20.01-70.00MHz (Two Terminals) CSTCG_V 20.00-33.86MHz Super Small! Leaded kHz Range CSTLS_G 3.40-10.00MHz CSBLA_E 375-429kHz CSTLS_X 16.00-70.00MHz CSBLA_E 430-509kHz CSBLA_E 510-699kHz CSBLA_J 700-1250kHz The kHz resonators have only two terminals. Notice: "CERALOCKr for consumer" and "CERALOCKr for automotive" is different in the specification of Operating Temperature Range, Environmental Characteristics, Physical Characteristics and so on. Please choose either "for consumer" or "for automotive" according to the required specification. 2 !Note * This PDF catalog is downloadedand !CAUTION (forMurata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our !Note * Please read rating from the website of storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. P16E.pdf 10.12.7 o Part Numbering CERALOCKr (MHz) (Part Number) qProduct ID Product ID CS wFrequency/Capacitance Code A T eStructure/Size Code LS CC CR/CE/CG CV CW Structure/Size Round Lead Type Cap Chip Type Small-cap Chip Type Monolithic Chip Type Small Monolithic Chip Type Frequency/Capacitance MHz with No capacitance built-in MHz with Built-in Capacitance uLoad Capacity Code 1 2 3 4 5 6 iIndividual Specification Code *** tDesign Code Gpp T/Vpp Xpp Design Thickness Shear mode Thickness Expander mode Thickness Expander mode (3rd overtone) oPackaging Code -B0 -A0 -R0 -R1 Packaging Bulk Radial Taping H0=18mm Plastic Taping o=180mm Plastic Taping o=330mm Individual Specification Three-digit alphanumerics express "Individual Specification". Design 3/5/6pF 10pF 15pF 22pF 30/33/39pF 47pF Ceramic Resonators CS q T w CE e 16M0 r V 5 3 *** i -R0 o yInitial Frequency Tolerance Code 5 3 2 1 H Design 0.5% 0.3% 0.2% 0.1% 0.07% tyu rNominal Center Frequency Expressed by four-digit alphanumerics. The unit is in hertz (Hz). Decimal point is expressed by capital letter "M". With standard products, "iIndividual Specification" is omitted. pp indicates initial frequency tolerance and load capacity. Radial taping is applied to lead type and plastic taping to chip type. 3 !Note * This PDF catalog is downloadedand !CAUTION (forMurata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our !Note * Please read rating from the website of storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. P16E.pdf 10.12.7 CERALOCKr (kHz) (Part Number) qProduct ID Product ID CS wFrequency/Capacitance Code B eStructure/Size Code LA FB rNominal Center Frequency Expressed by four-digit alphanumerics. The unit is in hertz (Hz). Capital letter "K" following three figures expresses the unit of "kHz." 1.0MHz (1000kHz) or above is expressed by three figures and capital letter "M" for decimal point. Structure/Size Two-Terminal Lead Type SMD Type uPackaging Code -B0 -R1 Packaging Bulk Plastic Taping o=330mm *** Frequency/Capacitance kHz with No capacitance built-in yIndividual Specification Code Individual Specification Three-digit alphanumerics express "Individual Specification". Ceramic Resonators CS q B w FB e 500K r J58 t *** y -R1 u tDesign Code Epp Jpp Design Area Expansion mode Area Expansion mode (Closed Type) pp indicates initial frequency tolerance and load capacitance. With standard products, "yIndividual Specification" is omitted. 4 !Note * This PDF catalog is downloadedand !CAUTION (forMurata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our !Note * Please read rating from the website of storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. P16E.pdf 10.12.7 Ceramic Resonators (CERALOCKr) MHz Chip Type -Tight Frequency Tolerance for Automotive4.50.1 1.4 max. 2.00.1 1 Chip type CERALOCK(R) with built-in load capacitors provides high accuracy in an extremely small package. MURATA's frequency adjustment and package technology expertise has enabled the development of the chip CERALOCK(R) with built-in load capacitors. This diverse series owes its development to MURATA's original mass production techniques and high reliability, and has achieved importance in the worldwide automotive market. 0.300.20 0.20.2 4.1 max. 0.60.05 1.10.1 0.4 (ref.) 0.4 (ref.) (3) 0.40.1 (2) (1) 0.40.1 0.4 (ref.) 0.40.1 CSTCR_G15C 4.00-7.99MHz 0.750.1 1.50.1 1.50.1 : EIAJ Monthly Code (in mm) s Features 1. The series are high accuracy resonators whose total tolerance is available for less than +-3,000ppm. 2. The series has high reliability and is available for a wide temperature range. 3. Oscillation circuits do not require external load capacitors. 4. The series is available for a wide frequency range. 5. The resonators are extremely small and have a low profile. 6. No adjustment is necessary for oscillation circuits. 3.20.15 1.30.15 0.100.10 1.1 max. 0.40.1 0.700.10 0.10.1 3.0 max. 0.50 (ref.) 0.50 (ref.) 0.50 (ref.) (3) (2) (1) 0.40.1 0.40.1 0.40.1 s Applications 1. Cluster panel and Control panel 2. Safety control (Anti-lock Brake System, Electronic Stability Control, Airbag, etc.) 3. Engine ECU, Electronic Power Steering, Immobilizer, etc. 4. Car Airconditioner, Power Window, Remote Keyless Entry system, etc. 5. Intelligent Transportation System (Lane Keeping System, Millimeter wave radar, etc.) 6. Battery control for hybrid cars CSTCE_G15C 8.00-13.99MHz 0.40.1 1.20.1 1.20.1 : EIAJ Monthly Code (in mm) 3.20.15 1.30.15 0.100.10 1.1 max. 0.40.1 0.10.1 3.0 max. 0.5 (ref.) 0.5 (ref.) 0.5 (ref.) (3) (2) (1) 0.40.1 0.40.1 0.40.1 0.90.1 CSTCE_V13C 14.00-20.00MHz 0.40.1 1.20.1 1.20.1 : EIAJ Monthly Code (in mm) Part Number CSTCR_G15C CSTCE_G15C CSTCE_V13C Oscillating Frequency (MHz) 4.00 to 7.99 8.00 to 13.99 14.00 to 20.00 Initial Tolerance 0.1% 0.1% 0.1% Temperature Stability (%) 0.13 0.13 0.13 Temperature Range (C) -40 to 125 -40 to 125 -40 to 125 Irregular or stop oscillation may occur under unmatched circuit conditions. Please check the actual conditions prior to use. 5 !Note * This PDF catalog is downloadedand !CAUTION (forMurata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our !Note * Please read rating from the website of storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. P16E.pdf 10.12.7 1 s Oscillation Frequency Measuring Circuit VDD 5pF Rf 1M Rd To Frequency Counter (1) (3) C1 C2 (2) s Standard Land Pattern Dimensions CSTCR_G15C (* This Land Pattern is not common to CSTCR_G.) 0.4 1.1 0.4 1.1 0.4 0.4 0.8 0.4 0.8 0.4 CSTCE_G15C 1.90 ~ 2.10 2.6 1.2 1.5 1.5 Land Pattern 1.2 Land Pattern (in mm) (in mm) s Oscillation Frequency Temperature Stability CSTCE_V13C (* This Land Pattern is not common to CSTCE_V.) +0.2 CSTCR_G15C 0.4 0.8 0.4 0.8 0.4 Oscillating Frequency Shift (%) Land Pattern +0.1 1.90 ~ 2.10 0 -0.1 1.2 1.2 -0.2 -60 (in mm) -40 -20 0 +20 +40 +60 +80 +100 +120 +140 Temperature (C) CSTCE_G15C +0.2 +0.2 CSTCE_V13C Oscillating Frequency Shift (%) Oscillating Frequency Shift (%) -40 -20 0 +20 +40 +60 +80 +100 +120 +140 +0.1 +0.1 0 0 -0.1 -0.1 -0.2 -60 -0.2 -60 -40 -20 0 +20 +40 +60 +80 +100 +120 +140 Temperature (C) Temperature (C) 6 !Note * This PDF catalog is downloadedand !CAUTION (forMurata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our !Note * Please read rating from the website of storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. P16E.pdf 10.12.7 Application Circuits Utilization s TMP92CD54IF (Toshiba) 16-bit Microcomputer Vcc3=3.3V Vcc5=5.0V Vcc=5.0V 1 s MB90F387 (Fujitsu) 16-bit Microcomputer 0.1F H1 H2 IC : TMP92CD54IF H IC : MB90F387 74 CERALOCKr 72 L H1: 36, 68, 86 H2: 2, 4, 15, 40, 50, 61, 75 L: 1, 3, 13, 38, 51, 63, 73, 88 V2 V1 CERALOCKr: CSTCE10M0G15Cpp-R0 C1=33pF (Typ.) C2=33pF (Typ.) 27 CERALOCKr 28 26 L 0.1F V2 C1 C2 H: 1, 2, 21, 22, 24 L: 20, 23, 25, 48 V1 C1 C2 CERALOCKr: CSTCE8M00G15Cpp-R0 C1=33pF (Typ.) C2=33pF (Typ.) s MC68HC908AZ60AVFU (Freescale) 8-bit Microcomputer Vdd=5.0V s ST72F561 (HS) (ST Microelectronics) 8-bit Microcomputer Vdd=5.0V H EVALUATION BOARD IC : MC68HC908AZ60AVFU 59 1M CERALOCKr V1 C1 C2 V2 CERALOCKr: CSTCE16M0V13Cpp-R0 C1=15pF (Typ.) C2=15pF (Typ.) V1 58 GND 1 60 IC : ST72F561 (HS) 2 CERALOCKr L H: 9, 25, 41, 57, 58 L: 8, 24, 40, 55, 56 V2 C1 C2 CERALOCKr: CSTCE8M00G15App-R0 C1=33pF (Typ.) C2=33pF (Typ.) s PD70F3283YGC (Renesas) 32-bit Microcomputer Vdd=3.3V s M30842MCT-XXXGP (Renesas) 16-bit Microcomputer Vcc=5.0V 10k H 14 IC : PD70F3283YGC 12 CERALOCKr H: 1, 5, 9, 34, 70 L: 2, 8, 11, 15, 33, 69 CERALOCKr: CSTCE10M0G15Cpp-R0 C1=33pF (Typ.) C2=33pF (Typ.) 13 10 4.7F L H 19 IC : M30842MCT-XXXGP (High*) 22 CERALOCKr 20 L H: 23, 24, 37, 39, 59, 74, 91, 118, 122, 132, 142, 143 L: 15, 16, 21, 36, 41, 57, 76, 93, 110~113, 120, 121, 130, 140 *High: XIN-XOUT Drive Capacity Select Bit V1 C1 C2 V2 CERALOCKr: CSTCE8M00G15Cpp-R0 C1=33pF (Typ.) C2=33pF (Typ.) V1 C1 C2 V2 7 !Note * This PDF catalog is downloadedand !CAUTION (forMurata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our !Note * Please read rating from the website of storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. P16E.pdf 10.12.7 Ceramic Resonators (CERALOCKr) MHz Chip Type -Standard Frequency Tolerance for Automotive7.20.2 0.450.3 0.30.3 6.6 max. 0.50.05 0.45 (Ref.) (3) 1.20.2 0.45 (Ref.) (2) 1.40.2 0.45 (Ref.) (1) 1.20.2 t t : 1.750.05 (2.00--2.99MHz) t : 1.550.05 (3.00MHz--) CSTCC_G_A 2.00-3.99MHz 1.10.1 2.50.1 2.50.1 2.1 max. : EIAJ code (in mm) 0.40.05 1.150.05 : EIAJ Monthly Code 1.4 max. (in mm) 0.40.1 0.700.10 1.1 max. (in mm) (in mm) 2.00.1 s Features 1. The series has high reliability and is available for a wide temperature range. 2. Oscillation circuits do not require external load capacitors. 3. The series is available in a wide frequency range. 4. The resonators are extremely small and have a low profile. 5. No adjustment is necessary for oscillation circuits. 4.50.1 0.30.2 (3) 0.20.2 (2) 4.1 max. (1) 0.4 (ref.) 0.4 (ref.) 0.4 (ref.) 0.80.1 0.80.1 0.80.1 s Applications 1. Cluster panel and Control panel 2. Safety control (Anti-lock Brake System, Electronic Stability Control, Airbag, etc.) 3. Engine ECU, Electronic Power Steering, Immobilizer, etc. 4. Car Airconditioner, Power Window, Remote Keyless Entry system, etc. 5. Electronic Toll Collection system, Car Navigation, etc. CSTCR_G_B 4.00-7.99MHz 0.40.1 0.750.1 1.50.1 0.40.1 1.50.1 0.40.1 3.20.15 0.100.10 1.30.15 0.50 (ref.) 0.50 (ref.) (3) (2) (1) 0.40.1 0.40.1 0.40.1 1.30.1 0.10.1 3.0 max. 0.50 (ref.) CSTCE_G_A 8.00-13.99MHz 0.40.1 1.20.1 1.20.1 3.20.15 1.30.15 0.100.10 1.1 max. 3.70.2 0.10.1 3.0 max. M (0.5) (1) 0.40.1 Terminals (1) and (3) are interchangeable. Terminal (2) should be soldered only to fix the resonator onto PCB Terminal (2) should be electrically 0.40.2 0.50.2 0.40.2 floating so it cannot be connected 0.50.3 0.50.3 0.50.3 anywhere. Thickness varies with frequency. *: EIAJ Monthly Code (0.5) (3) (0.5) (2) 0.5 (ref.) 0.5 (ref.) 0.5 (ref.) (3) (2) (1) 0.40.1 0.40.1 0.40.1 0.90.1 CSTCE_V_C 14.00-20.00MHz 0.40.1 1.20.1 1.20.1 : EIAJ Monthly Code CSACV_X_Q 20.01-70.00MHz (in mm) 1.60.2 1.60.2 1.850.3 Continued on the following page. 8 3.10.2 3.00.2 2 Chip type CERALOCK(R) with built-in load capacitors provides high accuracy in an extremely small package. MURATA's frequency adjustment and package technology expertise has enabled the development of the chip CERALOCK(R) with built-in load capacitors. This diverse series owes its development to MURATA's original mass production techniques and high reliability, and has achieved importance in the worldwide automotive market. !Note * This PDF catalog is downloadedand !CAUTION (forMurata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our !Note * Please read rating from the website of storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. P16E.pdf 10.12.7 Continued from the preceding page. 3.70.2 1.30.1 M (0.7) (1) (0.7) (3) (0.9) (2) 0.40.2 0.50.2 0.40.2 0.50.3 0.50.3 0.50.3 Thickness varies with frequency and built-in capacitance. *: EIAJ code 1.60.2 1.60.2 1.850.3 3.10.2 2 CSTCV_X_Q 20.01-70.00MHz (in mm) Part Number CSTCC_G_A CSTCR_G_B CSTCE_G_A CSTCE_V_C CSACV_X_Q CSTCV_X_Q Oscillating Frequency (MHz) 2.00 to 3.99 4.00 to 7.99 8.00 to 13.99 14.00 to 20.00 20.01 to 70.00 20.01 to 70.00 Initial Tolerance 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% Temperature Stability (%) 0.4 [-0.6% to +0.3%:Built-in Capacitance 47pF type within Freq.2.00 to 3.49MHz] 0.15 0.2 0.15 0.3 0.3 Temperature Range (C) -40 to 125 -40 to 125 -40 to 125 -40 to 125 -40 to 125 -40 to 125 Irregular or stop oscillation may occur under unmatched circuit conditions. Please check the actual conditions prior to use. s Oscillation Frequency Measuring Circuit CSTCC_G_A VDD CSTCE_G_A/CSTCE_V_C/CSTCR_G_B/CSTCV_X_Q VDD 5pF Rf To Frequency counter Rf 1M Rd Rd To Frequency Counter (1) (3) (1) (3) C1 C2 (2) C1 C2 (2) CSACV_X_Q 22F + 0.01F VDD Rf To Frequency Counter CL1 CL2 9 !Note * This PDF catalog is downloadedand !CAUTION (forMurata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our !Note * Please read rating from the website of storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. P16E.pdf 10.12.7 s Standard Land Pattern Dimensions CSTCC_G_A CSTCR_G_B 0.8 0.7 0.8 0.7 0.8 1.2 1.2 1.4 1.2 1.2 2.6 1.6 3.8~4.4 2 0.4 1.5 2.5 2.5 0.4 1.5 0.4 Land Pattern Land Pattern (in mm) (in mm) CSTCE_G_A CSTCE_V_C (* This Land Pattern is not common to CSTCE_V.) 0.4 0.8 0.4 0.8 0.4 0.4 0.8 0.4 0.8 0.4 1.90 ~ 2.10 1.2 1.90 ~ 2.10 1.2 Land Pattern 1.2 1.2 Land Pattern (in mm) (in mm) CSTCV_X_Q 0.5 1.0 0.5 CSACV_X_Q 1.1 0.5 1.1 0.5 0.5 1.0 0.5 1.1 0.5 1.1 0.5 3.10.2 1.0 0.5 1.0 0.5 1.6 1.6 1.6 Land Pattern (in mm) 1.6 (in mm) 10 3.10.2 Land Pattern !Note * This PDF catalog is downloadedand !CAUTION (forMurata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our !Note * Please read rating from the website of storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. P16E.pdf 10.12.7 s Oscillation Frequency Temperature Stability CSTCC_G_A +0.2 +0.2 CSTCR_G_B Oscillating Frequency Shift (%) Oscillating Frequency Shift (%) +0.1 +0.1 0 0 2 -0.1 -0.1 -0.2 -60 -40 -20 0 +20 +40 +60 +80 +100 +120 +140 -0.2 -60 -40 -20 0 +20 +40 +60 +80 +100 +120 +140 Temperature (C) Temperature (C) CSTCE_G_A +0.2 +0.2 CSTCE_V_C Oscillating Frequency Shift (%) Oscillating Frequency Shift (%) -40 -20 0 +20 +40 +60 +80 +100 +120 +140 +0.1 +0.1 0 0 -0.1 -0.1 -0.2 -60 -0.2 -60 -40 -20 0 +20 +40 +60 +80 +100 +120 +140 Temperature (C) Temperature (C) CSTCV_X_Q +0.2 +0.2 CSACV_X_Q Oscillating Frequency Shift (%) +0.1 Oscillating Frequency Shift (%) -40 -20 0 +20 +40 +60 +80 +100 +120 +140 +0.1 0 0 -0.1 -0.1 -0.2 -60 -0.2 -60 -40 -20 0 +20 +40 +60 +80 +100 +120 +140 Temperature (C) Temperature (C) 11 !Note * This PDF catalog is downloadedand !CAUTION (forMurata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our !Note * Please read rating from the website of storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. P16E.pdf 10.12.7 Application Circuits Utilization s PD78F9222MC-5A4 (Renesas) 8-bit Microcomputer Vdd=5.0V V'dd=7.0V Vcc=5.0V s M30260F8AGP (Renesas) 16-bit Microcomputer 2 H 6 10k H 7 IC : PD78F9222MC-5A4 2 CERALOCKr H: 5, 20 L: 1 CERALOCKr: CSTCR6M00G55B-R0 C1=39pF (Typ.) C2=39pF (Typ.) 3 8 L 23 IC : M30260F8AGP (High*) 24 CERALOCKr L H: 11, 46, 47, 48 L: 4, 9, 44 *High: XIN-XOUT Drive Capacity Select Bit V1 C1 C2 V2 CERALOCKr: CSTCE10M0G55A-R0 C1=33pF (Typ.) C2=33pF (Typ.) V1 C1 C2 V2 s MB90F347D (Fujitsu) 16-bit Microcomputer Vcc=5.0V s MC68HC908AZ60AVFU (Freescale) 8-bit Microcomputer Vdd=5.0V H IC : MB90F347D EVALUATION BOARD IC : MC68HC908AZ60AVFU L 59 1M CERALOCKr V1 CERALOCKr: CSTCE8M00G55A-R0 C1=33pF (Typ.) C2=33pF (Typ.) C1 C2 V2 CERALOCKr: CSTCE16M0V53C-R0 C1=15pF (Typ.) C2=15pF (Typ.) 58 GND 93 CERALOCKr 92 H: 15, 32, 65, 90 L: 16, 35, 44, 66, 91 V1 C1 C2 V2 s ST72F324J6T3 (MS) (ST Microelectronics) 8-bit Microcomputer Vdd=5.0V s PIC12F675-I/P (HS) (Microchip) 8-bit Microcomputer Vdd=5.0V H IC : ST72F324J6T3 (MS) H IC : PIC12F675-I/P(HS) 42 CERALOCKr 41 L 2 1M CERALOCKr V1 CERALOCKr: CSTCR4M00G55B-R0 C1=39pF (Typ.) C2=39pF (Typ.) C1 C2 3 L H: 13, 21, 32, 43 L: 14, 22, 33, 39, 40 V1 C1 C2 V2 H: 1 L: 4, 8 V2 CERALOCKr: CSTCE8M00G52A-R0 C1=10pF (Typ.) C2=10pF (Typ.) 12 !Note * This PDF catalog is downloadedand !CAUTION (forMurata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our !Note * Please read rating from the website of storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. P16E.pdf 10.12.7 Notice for Automotive s Soldering and Mounting (CSTCC/CSTCR/CSTCE_V/CSTCE_G Series) 1. Soldering (1) Re-flow soldering Please mount component on a circuit board by re-flow soldering. Flow soldering is not acceptable. Recommendable Flux and Solder Flux Please use rosin based flux, but do not use water soluble flux. Please use solder (Sn-3.0Ag-0.5Cu) under the following condition. Standard thickness of soldering paste: 0.10 to 0.15mm 2 Solder Recommendable Soldering Profile Pre-heating Heating Peak Temperature 150 to 180C 220C min. upper limit: 260C lower limit: 245C 60 to 120s 30 to 60s 5s max. Temperature (C) 1s max. 260 245 220 180 150 Pre-heating (150 to 180C) Peak Temperature shall be measured on the surface of component. Heating (220C min.) (2) Soldering with Iron Be compelled to mount component by using soldering iron, please do not directly touch the component with soldering iron. The terminals of component or electrical characteristics may be damaged if excess thermal stress is applied. Recommendable Soldering with Iron Heating of the soldering iron Watt Shape of the soldering iron Solering Time Solder 350C max. 30W max. o3mm max. 5s max. at one terminal Sn-3.0Ag-0.5Cu Gradual Cooling 60 to 120s 30 to 60s (3) Solder Volume Please make the solder volume less than the height of the substrate. When exceeding the substrate, the damage of adhesive for sealing between the metal cap and the substrate may occur. (4) etc. Do not reuse removed component from a circuit board after soldering. (5) Condition for Placement Machines The component is recommended with placement machines with employ optical placement capabilities. The component might be resulted in damage by excessive mechanical force. Please make sure that you have evaluated by using placement machines before going into mass production. Do not use placement machines which utilize mechanical positioning. Please contact Murata for details beforehand. 2. Wash (1) Cleaning Solvents HCFC, Isopropanol, Tap water, Demineralized water, Cleanthrough750H, Pine alpha 100S, Techno care FRW Continued on the following page. 13 !Note * This PDF catalog is downloadedand !CAUTION (forMurata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our !Note * Please read rating from the website of storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. P16E.pdf 10.12.7 Notice for Automotive Continued from the preceding page. (2) Temperature Difference : dT *1 dTV60C (dT=Component-solvent) *1 ex. In case the component at +90C immerses into cleaning solvent at +60C, then dT=30C. 2 (3) Conditions (a) Ultrasonic Wash 1 minute max. in above solvent at +60C max. (Frequency: 28kHz, Output: 20W/l) (b) Immersion Wash 5 minutes max. in above solvent at +60C max. (c) Shower or Rinse Wash 5 minutes max. in above solvent at +60C max. (4) Drying 5 minutes max. by air blow at +80C max. (5) Others (a) Total washing time should be within 10 minutes. (b) The component may be damaged if it is washed with chlorine, petroleum, or alkali cleaning solvent. 3. Coating Conformal coating of the component is acceptable. However, the resin material, curing temperature, and other process conditions should be evaluated to confirm stable electrical characteristics are maintained. 14 !Note * This PDF catalog is downloadedand !CAUTION (forMurata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our !Note * Please read rating from the website of storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. P16E.pdf 10.12.7 Notice for Automotive s Soldering and Mounting (CSTCV/CSACV Series) 1. Soldering (1) Re-flow soldering Please mount component on a circuit board by re-flow soldering. Flow soldering is not acceptable. Recommendable Flux and Solder Flux Please use rosin based flux, but do not use water soluble flux. Please use solder (Sn-3.0Ag-0.5Cu) under the following condition. Standard thickness of soldering paste: 0.10 to 0.15mm 260 245 220 180 150 Pre-heating (150 to 180C) Peak 2 Temperature (C) Solder Heating (220C min.) Recommendable Soldering Profile Pre-heating Heating Peak Temperature 150 to 180C 220C min. upper limit: 260C lower limit: 245C 60 to 120s 30 to 60s 1s max. 5s max. Gradual Cooling 60 to 120s Temperature shall be measured on the surface of component. 30 to 60s (2) Soldering with Iron Be compelled to mount component by using soldering iron, please do not directly touch the component with soldering iron. The terminals of component or electrical characteristics may be damaged if excess thermal stress is applied. Recommendable Soldering with Iron Heating of the soldering iron Watt Shape of the soldering iron Solering Time Solder 350C max. 30W max. o3mm max. 5s max. at one terminal Sn-3.0Ag-0.5Cu (3) etc. Do not reuse removed component from a circuit board after soldering. (4) Condition for Placement Machines The component is recommended with placement machines with employ optical placement capabilities. The component might be resulted in damage by excessive mechanical force. Please make sure that you have evaluated by using placement machines before going into mass production. Do not use placement machines which utilize mechanical positioning. Please contact Murata for details beforehand. 2. Wash (1) Cleaning Solvents HCFC, Isopropanol, Tap water, Demineralized water, Cleanthrough750H, Pine alpha 100S, Techno care FRW (2) Temperature Difference : dT *1 dTV60C (dT=Component-solvent) *1 ex. In case the component at +90C immerses into cleaning solvent at +60C, then dT=30C. Continued on the following page. 15 !Note * This PDF catalog is downloadedand !CAUTION (forMurata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our !Note * Please read rating from the website of storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. P16E.pdf 10.12.7 Notice for Automotive Continued from the preceding page. (3) Conditions (a) Ultrasonic Wash 1 minute max. in above solvent at +60C max. (Frequency: 28kHz, Output: 20W/l) 2 (4) Drying 5 minutes max. by air blow at +80C max. (5) Others (a) Total washing time should be within 10 minutes. (b) The component may be damaged if it is washed with chlorine, petroleum, or alkali cleaning solvent. (b) Immersion Wash 5 minutes max. in above solvent at +60C max. (c) Shower or Rinse Wash 5 minutes max. in above solvent at +60C max. 3. Coating Conformal coating of the component is acceptable. However, the resin material, curing temperature, and other process conditions should be evaluated to confirm stable electrical characteristics are maintained. 16 !Note * This PDF catalog is downloadedand !CAUTION (forMurata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our !Note * Please read rating from the website of storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. P16E.pdf 10.12.7 Notice for Automotive s Storage and Operating Conditions 1. Product Storage Condition Please store the products in a room where the temperature/humidity is stable, and avoid such places where there are large temperature changes. Please store the products under the following conditions: Temperature: -10 to + 40 degrees C Humidity: 15 to 85% R.H. 2. Expiration Date on Storage Expiration date (Shelf life) of the products is six months after delivery under the conditions of a sealed and unopened package. Please use the products within six months after delivery. If you store the products for a long time (more than six months), use carefully because the products may be degraded in solderability and/or rusty. Please confirm solderability and characteristics for the products regularly. 3. Notice on Product Storage (1) Please do not store the products in a chemical atmosphere (Acids, Alkali, Bases, Organic gas, Sulfides and so on), because the characteristics may be reduced in quality, and/or be degraded in the solderability due to the storage in a chemical atmosphere. (2) Please do not put the products directly on the floor without anything under them to avoid damp and/or dusty places. (3) Please do not store the products in places such as: in a damp heated place, in a place where direct sunlight comes in, in a place applying vibrations. (4) Please use the products immediately after the package is opened, because the characteristics may be reduced in quality, and/or be degraded in the solderability due to storage under the poor conditions. (5) Please do not drop the products to avoid cracking of ceramic elements. 4. Others Conformal coating of the component is acceptable. However, the resin material, curing temperature, and other process conditions should be evaluated to confirm that stable electrical characteristics are maintained. Please be sure to consult with our sales representatives or engineers whenever and prior to using the products. 2 s Rating The component may be damaged if excessive mechanical stress is applied. s Handling "CERALOCK" may stop oscillating or oscillate irregularly under improper circuit conditions. 17 !Note * This PDF catalog is downloadedand !CAUTION (forMurata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our !Note * Please read rating from the website of storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. P16E.pdf 10.12.7 Packaging for Automotive s Minimum Quantity Part Number Plastic Tape o180mm Plastic Tape o330mm Bulk Dimensions CSTCC_G_A CSTCR_G_B 2,000 3,000 3,000 3,000 3,000 3,000 3,000 2,000 2,000 6,000 9,000 9,000 9,000 9,000 9,000 9,000 6,000 6,000 500 500 500 500 500 500 500 500 500 a a a b b b b a a (pcs.) 2 CSTCR_G15C CSTCE_G_A CSTCE_G15C CSTCE_V_C CSTCE_V13C CSTCV_X_Q CSACV_X_Q The order quantity should be an integral multiple of the "Minimum Quantity" shown above. c Dimensions of Reel a Trailer 160-190 Empty Components (o180 0 ) -1.5 Leader Cover Film Empty 160 min. (o180 0 ) -1.5 400-560 Trailer 160-190 Empty Components b Leader Cover Film Empty 160 min. 400-560 o13.00.2 2.00.5 +1.0 0 o13.00.2 2.00.5 13.0 9.0 +1.0 0 17.01.0 13.01.0 (in mm) s Dimensions of Taping CSTCR_G15C 1.750.1 4.00.1 2.00.05 +0.1 o1.5 -0 4.00.1 2.00.05 CSTCE_G15C o1.5 +0.1 -0.0 1.750.1 3.50.05 5.50.05 12.00.2 4.00.1 +0.1 o1.5 -0 0.30.05 (3) 4.00.1 The cover film peel strength force 0.1 to 0.7N The cover film peel speed 300mm/min. o1.0 -0.0 1.50 -0.05 +0.10 +0.2 0.250.05 (1.85 max.) Cover Film 10 Direction of Feed (in mm) Direction of Feed Continued on the following page. 18 (1.30 max.) (in mm) 1.250.05 0.900.10 2.20.1 The cover film peel strength force 0.1 to 0.7N The cover film peel speed 300mm/min. Cover Film 10 (3) 3.40 -0.05 (3)(2)(1) (3)(2)(1) 4.70.1 (9.5) (5.2) 8.00.2 +0.10 !Note * This PDF catalog is downloadedand !CAUTION (forMurata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our !Note * Please read rating from the website of storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. P16E.pdf 10.12.7 Packaging for Automotive Continued from the preceding page. s Dimensions of Taping CSTCE_V13C 1.750.1 Dimensions of Carrier Tape 4.00.1 2.00.05 o1.5 -0.0 +0.1 CSTCC_G_A 4.00.1 2.00.05 o1.550.05 1.750.1 5.50.05 3.50.05 (3) (2) (1) 3.450.1 (3)(2)(1) (5.2) 8.00.2 0.250.05 1.100.05 (3) (1.40 max.) 1.50 -0.05 The cover film peel strength force 0.1 to 0.7N The cover film peel speed 300mm/min. Cover Film 10 +0.10 Direction of Feed (in mm) Direction of Feed 1, 2: Dimensions vary with frequency range of CERALOCKr. 2.00-2.99MHz 3.00-3.99MHz Frequency Range 1.850.05 1.650.05 t1 1 2.45 max. 2.25 max. t2 2 t1 1 t2 2 4.00.1 +0.1 o1.0 -0.0 (3) 0.30.05 4.00.1 o1.5 +0.3 -0.0 The cover film peel strength force 0.1 to 0.7N 3.30.1 The cover film peel speed 300mm/min. Cover Film 10 7.60.1 (9.5) 12.00.2 2 (in mm) CSTCR_G_B 1.750.1 4.00.1 2.00.05 +0.1 o1.5 -0 4.00.1 2.00.05 CSTCE_G_A o1.5 +0.1 -0.0 1.750.1 3.50.05 5.50.05 12.00.2 4.00.1 +0.1 o1.5 -0 0.30.05 (3) 4.00.1 The cover film peel strength force 0.1 to 0.7N The cover film peel speed 300mm/min. o1.0 -0.0 1.50 -0.05 +0.10 +0.2 0.250.05 (1.85 max.) Cover Film 10 Direction of Feed (in mm) Direction of Feed CSTCE_V_C 1.750.1 Dimensions of Carrier Tape 4.00.1 2.00.05 +0.1 o1.5 -0.0 CSTCV_X_Q 4.00.1 2.00.1 +0.1 o1.5 -0.0 1.750.1 3.50.05 5.50.1 3.450.1 (3)(2)(1) (5.2) (3)(2)(1) 8.00.2 (9.5) 0.250.05 1.100.05 (3) (1.40 max.) 1.50 -0.05 The cover film peel strength force 0.1 to 0.7N The cover film peel speed 300mm/min. Cover Film 10 +0.10 Cover Film 10 (3) Direction of Feed 1, 2: Dimensions vary with product thickness of CERALOCKr. Thickness of CERALOCKr t1 1 t2 2 1.50-1.40 1.650.1 2.0 max. 1.30-1.20 1.450.1 1.8 max. 1.10-1.00 1.20.1 1.5 max. Direction of Feed (in mm) CSACV_X_Q 4.00.1 2.00.1 +0.1 o1.5 -0.0 1.750.1 5.50.1 (3)(2)(1) (9.5) 0.30.1 The cover film peel strength force 0.1 to 0.7N The cover film peel speed 300mm/min. Cover Film 10 4.00.1 +0.1 3.35 -0.05 (3) +0.2 o1.5 -0.0 t1 1 t2 2 Direction of Feed 1, 2: Dimensions vary with product thickness of CERALOCKr. Thickness of CERALOCKr t1 1 t2 2 1.50-1.40 1.650.1 2.0 max. 1.30-1.20 1.450.1 1.8 max. 1.10-1.00 1.20.1 1.5 max. 4.10.1 12.00.2 (in mm) t1 1 (in mm) t2 2 4.00.1 o1.0 0.30.1 +0.1 -0.0 The cover film peel strength force 0.1 to 0.7N The cover film peel speed 300mm/min. 4.00.1 +0.1 3.35 -0.05 +0.2 o1.5 -0.0 4.10.1 12.00.2 (1.30 max.) (in mm) 1.250.05 0.900.10 2.20.1 The cover film peel strength force 0.1 to 0.7N The cover film peel speed 300mm/min. Cover Film 10 (3) 3.40 -0.05 (3)(2)(1) (3)(2)(1) 4.70.1 (9.5) (5.2) 8.00.2 +0.10 19 !Note * This PDF catalog is downloadedand !CAUTION (forMurata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our !Note * Please read rating from the website of storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. P16E.pdf 10.12.7 Ceramic Resonators (CERALOCKr) MHz Chip Type -Tight Frequency Tolerance for General Usage4.50.1 1.4 max. 0.60.05 4.1 max. 1.10.1 0.4 (ref.) 0.4 (ref.) (3) 0.40.1 (2) (1) 0.40.1 0.4 (ref.) 0.40.1 2.00.1 3 Chip type CERALOCK(R) with built-in load capacitors provides high accuracy in an extremely small package. MURATA's frequency adjustment and packaging technology expertise has enabled the development of the chip CERALOCK(R) with built-in load capacitors. High-density mounting is made possible by the small package and the elimination of the need for an external load capacitor. 0.300.20 0.20.2 s Features 1. Oscillation circuits do not require external load capacitors. 2. Available in a wide frequency range. 3. Extremely small and have a low profile. 4. No adjustment is necessary for oscillation circuits. CSTCR_G15L 4.00-7.99MHz 0.750.1 1.50.1 1.50.1 : EIAJ Monthly Code (in mm) 3.20.15 1.30.15 0.100.10 1.1 max. 0.40.1 0.700.10 0.10.1 s Applications 1. Clock oscillators for USB (Full-speed) controller ICs 2. Audio equipment and musical instruments, etc. 3. Other applications for replacement of Crystal Oscillators 0.50 (ref.) 3.0 max. 0.50 (ref.) 0.50 (ref.) (3) (2) (1) 0.40.1 0.40.1 0.40.1 CSTCE_G15L 8.00-13.99MHz 0.40.1 1.20.1 1.20.1 : EIAJ Monthly Code (in mm) 3.20.15 1.30.15 0.100.10 1.1 max. 2.5T0.2 1.4 max. 2.0T0.2 (0.5) (1) 0.05 +0.10 - 0.05 Thickness varies with frequency and built-in capacitance. *: EIAJ code 0.10.1 3.0 max. * 0.40.1 0.05 +0.10 - 0.05 (0.5) (3) (0.5) (2) 0.5 (ref.) 0.5 (ref.) 0.5 (ref.) 0.90.1 0.4 +0.3 0.4 +0.3 0.4 +0.3 - 0.2 - 0.2 - 0.2 0.5T0.2 0.5T0.2 0.5T0.2 (3) (2) (1) 0.40.1 0.40.1 0.40.1 CSTCE_V13L 14.00-20.00MHz 0.40.1 1.20.1 1.20.1 : EIAJ Monthly Code CSTCW_X11 20.01-48.00MHz 1.0T0.2 1.0T0.2 1.25T0.2 (in mm) (in mm) Part Number CSTCR_G15L CSTCE_G15L CSTCE_V13L CSTCW_X11 Oscillating Frequency (MHz) 4.00 to 7.99 8.00 to 13.99 14.00 to 20.00 20.01 to 48.00 Initial Tolerance 0.1% 0.1% 0.1% 0.1% Temperature Stability (%) 0.08 0.08 0.08 0.1 Temperature Range (C) 0 to 70 0 to 70 0 to 70 0 to 70 Irregular or stop oscillation may occur under unmatched circuit conditions. Please check the actual conditions prior to use. 20 !Note * This PDF catalog is downloadedand !CAUTION (forMurata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our !Note * Please read rating from the website of storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. P16E.pdf 10.12.7 s Oscillation Frequency Measuring Circuit CSTCR_G15L/CSTCE_G15L/CSTCE_V13L VDD CSTCW_X11 VDD 5pF Rf 1M Rd To Frequency Counter Rf To Frequency counter Rd (1) (3) (1) (3) C1 C2 (2) C1 C2 (2) 3 s Standard Land Pattern Dimensions CSTCR_G15L (* This Land Pattern is not common to CSTCR_G.) 0.4 1.1 0.4 1.1 0.4 0.4 0.8 0.4 0.8 0.4 CSTCE_G15L 1.90 ~ 2.10 2.6 1.2 1.5 1.5 Land Pattern 1.2 Land Pattern (in mm) (in mm) CSTCE_V13L (* This Land Pattern is not common to CSTCE_V.) CSTCW_X11 0.4 0.8 0.4 0.8 0.4 0.8 0.3 0.5 0.5 0.5 0.5 0.5 1.90 ~ 2.10 1.2 1.2 Land Pattern 0.8 0.3 1.0 1.0 Land Pattern (in mm) (in mm) 2.0 21 !Note * This PDF catalog is downloadedand !CAUTION (forMurata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our !Note * Please read rating from the website of storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. P16E.pdf 10.12.7 s Oscillation Frequency Temperature Stability CSTCR_G15L +0.2 +0.2 CSTCE_G15L Oscillating Frequency Shift (%) +0.1 Oscillating Frequency Shift (%) -40 -20 0 +20 +40 +60 +80 +100 +120 +140 +0.1 0 0 -0.1 -0.1 -0.2 -60 -0.2 -60 -40 -20 0 +20 +40 +60 +80 +100 +120 +140 Temperature (C) Temperature (C) 3 CSTCE_V13L +0.2 +0.2 CSTCW_X11 Oscillating Frequency Shift (%) +0.1 Oscillating Frequency Shift (%) +0.1 0 0 -0.1 -0.1 -0.2 -60 -40 -20 0 +20 +40 +60 +80 +100 +120 +140 -0.2 -40 -20 0 +20 +40 +60 +80 +100 Temperature (C) Temperature (C) 22 !Note * This PDF catalog is downloadedand !CAUTION (forMurata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our !Note * Please read rating from the website of storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. P16E.pdf 10.12.7 Application Circuits Utilization s M66291GP (Renesas) USB Transceiver Vset=3.3V Vdd=3.3V s MN102HF74GHL (Panasonic) 16-bit Microcontroller Fout H EVALUATION BOARD IC : M66291GP 14 1M CERALOCKr V1 C1 C2 13 220 V2 CERALOCKr: CSTCR6M00G15ppp-R0 C1=39pF (Typ.) C2=39pF (Typ.) V1 GND 82 18 IC : MN102HF74GHL 23 CERALOCKr H: 1~17, 22, 25, 26~42, 54, 58~60, 66~81, 83~91 L: 19, 20, 43~53, 55~57, 61~65, 82, 92~100 CERALOCKr: CSTCE12M0G15Lpp-R0 C1=33pF (Typ.) C2=33pF (Typ.) 24 L V2 C1 C2 3 s LC87F1964A (Sanyo) 8-bit Microcontroller Vdd=5.0V s TUSB2046B (Texas Instruments) USB 4-port HUB Vcc=3.3V 10k H H1 H IC : TUSB2046B IC : LC87F1964A 6 470 CERALOCKr V1 C1 C2 V2 CERALOCKr: CSTCE12M0G15Lpp-R0 C1=33pF (Typ.) C2=33pF (Typ.) 7 10k L1 L 30 H: 8, 19, 39 L: 5, 20, 40 H1: 31, 33 L1: 29, 30, 32, 34~36 V1 29 1M CERALOCKr V2 C1 C2 GND H: 3, 25 L: 7, 28 CERALOCKr: CSTCR6M00G15ppp-R0 C1=39pF (Typ.) C2=39pF (Typ.) s ISP1181BDGG (Philips) USB Controller Vset=3.3V H EVALUATION BOARD IC : ISP1181BDGG 48 CERALOCKr 47 GND V1 C1 C2 V2 CERALOCKr: CSTCR6M00G15ppp-R0 C1=39pF (Typ.) C2=39pF (Typ.) 23 !Note * This PDF catalog is downloadedand !CAUTION (forMurata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our !Note * Please read rating from the website of storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. P16E.pdf 10.12.7 Ceramic Resonators (CERALOCKr) MHz Chip Type -Standard Frequency Tolerance for General Usage7.20.2 Chip type CERALOCK(R) with built-in load capacitors provides an extremely small package. MURATA's package technology expertise has enabled the development of the Chip CERALOCK(R) with built-in load capacitors. High-density mounting can be realized because of the small package and the elimination of the need for an external load capacitor. 0.450.3 0.30.3 6.6 max. 0.50.05 0.45 (Ref.) (3) 1.20.2 0.45 (Ref.) (2) 1.40.2 0.45 (Ref.) (1) 1.20.2 t t : 1.750.05 (2.00--2.99MHz) t : 1.550.05 (3.00MHz--) s Features 1. Oscillation circuits do not require external load capacitors. 2. Available in a wide frequency range. 3. Extremely small and have a low profile. 4. No adjustment is necessary for oscillation circuits. CSTCC_G 2.00-3.99MHz 1.10.1 2.50.1 2.50.1 2.1 max. : EIAJ code (in mm) 0.40.05 1.150.05 : EIAJ Monthly Code 1.4 max. (in mm) 0.40.1 0.700.10 1.1 max. (in mm) (in mm) 2.00.1 4.50.1 0.30.2 4 (3) 0.20.2 (2) 4.1 max. (1) s Applications 1. Clock oscillators for microprocessors 2. Small electronic equipment such as handheld phone, digital video camcorder (DVC), digital still camera (DSC), portable audio player, etc. 3. Storage media and memory (HDD, Optical storage device, FDD, Flash memory card, etc.) 4. Office automation equipment (Mobile PC, Mouse, Keyboard, etc.) 5. Audio-visual applications (TV, DVD-HDD recorder, Audio equipment, Remote control, etc.) 6. Home appliances (Air conditioner, Microwave oven, Refrigerator, Washing machine, etc.) 0.4 (ref.) 0.80.1 0.4 (ref.) 0.4 (ref.) 0.80.1 0.80.1 CSTCR_G 4.00-7.99MHz 0.40.1 0.750.1 1.50.1 0.40.1 1.50.1 0.40.1 3.20.15 0.100.10 1.30.15 0.50 (ref.) 0.50 (ref.) (3) (2) (1) 0.40.1 0.40.1 0.40.1 1.1 max. 0.40.1 0.10.1 3.0 max. 0.50 (ref.) CSTCE_G 8.00-13.99MHz 0.40.1 1.20.1 1.20.1 3.20.15 0.100.10 1.30.15 0.100.10 1.1 max. 2.00.15 1.30.15 0.10.1 3.0 max. 0.90.1 0.40.1 0.0750.075 1.85 max. 0.850.1 0.62 (ref.) (3) 0.45 (ref.) (2) (1) 0.62 (ref.) 0.52 (ref.) (3) 0.50.1 0.41 (ref.) 0.52 (ref.) (2) (1) 0.30.1 0.50.1 0.60.10.40.1 0.60.1 CSTCE_V 14.00-20.00MHz 0.650.1 0.950.1 0.950.1 (in mm) CSTCG_V 20.00-33.86MHz (Ultra Small) 0.30.1 0.70.1 0.70.1 Continued on the following page. 24 3.00.2 !Note * This PDF catalog is downloadedand !CAUTION (forMurata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our !Note * Please read rating from the website of storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. P16E.pdf 10.12.7 Continued from the preceding page. 2.5T0.2 2.0T0.2 1.2 max. 2.5T0.2 2.0T0.2 1.4 max. * * 0.05 - 0.05 +0.10 (0.5) (0.5) 0.05 - 0.05 +0.10 0.05 +0.10 - 0.05 (0.5) (3) (0.5) (2) (0.5) (1) 0.05 +0.10 - 0.05 0.4 +0.3 - 0.2 0.4 +0.3 - 0.2 0.5T0.2 0.5T0.2 0.4 +0.3 0.4 +0.3 0.4 +0.3 - 0.2 - 0.2 - 0.2 0.5T0.2 0.5T0.2 0.5T0.2 Thickness varies with frequency and built-in capacitance. *: EIAJ code 1.0T0.2 1.0T0.2 1.25T0.2 (in mm) CSACW_X 20.01-70.00MHz Thickness varies with frequency. *: EIAJ code 1.0T0.2 1.0T0.2 1.25T0.2 (in mm) CSTCW_X 20.01-70.00MHz Part Number CSTCC_G CSTCR_G CSTCE_G CSTCE_G_Z CSTCE_V CSTCG_V CSACW_X CSTCW_X Oscillating Frequency (MHz) 2.00 to 3.99 4.00 to 7.99 8.00 to 13.99 8.00 to 13.99 14.00 to 20.00 20.00 to 33.86 20.01 to 70.00 20.01 to 70.00 Initial Tolerance 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% Temperature Stability (%) 0.3 [0.4%:Built-in Capacitance 47pF type within Freq.2.00 to 3.49MHz] 0.2 0.2 0.2 0.3 0.3 0.2 0.2 Temperature Range (C) -20 to 80 -20 to 80 -20 to 80 -40 to 125 -20 to 80 -20 to 80 -20 to 80 -20 to 80 4 Irregular or stop oscillation may occur under unmatched circuit conditions. Please check the actual conditions prior to use. 25 !Note * This PDF catalog is downloadedand !CAUTION (forMurata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our !Note * Please read rating from the website of storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. P16E.pdf 10.12.7 s Oscillation Frequency Measuring Circuit CSTCR_G/CSTCE_G/CSTCE_V/CSTCG_V VDD CSTCC_G/CSTCW_X VDD 5pF Rf 1M Rd To Frequency Counter Rf To Frequency counter Rd (1) (3) (1) (3) C1 C2 (2) C1 C2 (2) CSACW_X VDD 4 Rf To Frequency counter Rd CL1 CL2 26 !Note * This PDF catalog is downloadedand !CAUTION (forMurata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our !Note * Please read rating from the website of storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. P16E.pdf 10.12.7 s Standard Land Pattern Dimensions CSTCC_G CSTCR_G (* This Land Pattern is not common to CSTCR_G15C, CSTCR_G15L.) 0.8 0.7 0.8 0.7 0.8 1.2 1.2 1.4 1.2 1.2 2.6 1.6 3.8~4.4 0.4 1.5 2.5 2.5 0.4 1.5 0.4 Land Pattern Land Pattern (in mm) (in mm) CSTCE_G CSTCE_V (* This Land Pattern is not common to CSTCE_V13C, CSTCE_V_C, CSTCE_V13L.) 0.3 0.65 0.3 0.65 0.3 0.4 0.8 0.4 0.8 0.4 4 1.6 1.90 ~ 2.10 1.2 1.2 0.95 Land Pattern 0.95 Land Pattern (in mm) (in mm) CSTCG_V CSACW_X 0.3 0.5 0.3 0.5 0.3 0.5 0.8 0.3 0.5 1.6 0.3 0.8 0.8 Land Pattern 0.8 2.0 Land Pattern (in mm) (in mm) CSTCW_X 0.5 0.5 0.5 0.5 0.5 0.8 0.3 0.8 0.3 1.0 1.0 Land Pattern (in mm) 2.0 2.0 27 !Note * This PDF catalog is downloadedand !CAUTION (forMurata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our !Note * Please read rating from the website of storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. P16E.pdf 10.12.7 s Oscillation Frequency Temperature Stability CSTCC_G +0.2 +0.2 CSTCR_G Oscillating Frequency Shift (%) Oscillating Frequency Shift (%) -20 0 +20 +40 +60 +80 +100 +0.1 +0.1 0 0 -0.1 -0.1 -0.2 -40 -0.2 -60 -40 -20 0 +20 +40 +60 +80 +100 +120 +140 Temperature (C) Temperature (C) CSTCE_G +0.2 +0.2 CSTCE_V Oscillating Frequency Shift (%) Oscillating Frequency Shift (%) -40 -20 0 +20 +40 +60 +80 +100 +120 +140 4 +0.1 +0.1 0 0 -0.1 -0.1 -0.2 -60 -0.2 -60 -40 -20 0 +20 +40 +60 +80 +100 +120 +140 Temperature (C) Temperature (C) CSTCG_V +0.2 +0.2 CSACW_X Oscillating Frequency Shift (%) +0.1 Oscillating Frequency Shift (%) -40 -20 0 +20 +40 +60 +80 +100 +120 +140 +0.1 0 0 -0.1 -0.1 -0.2 -60 -0.2 -40 -20 0 +20 +40 +60 +80 +100 Temperature (C) Temperature (C) CSTCW_X +0.2 Oscillating Frequency Shift (%) +0.1 0 -0.1 -0.2 -40 -20 0 +20 +40 +60 +80 +100 Temperature (C) 28 !Note * This PDF catalog is downloadedand !CAUTION (forMurata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our !Note * Please read rating from the website of storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. P16E.pdf 10.12.7 Application Circuits Utilization s PD78F0533GB (Renesas) 8-bit Microcomputer Vdd=5.0V Vcc=5.0V s M38235G6HP (Renesas) 8-bit Microcomputer 10k H 6 IC : PD78F0533GB 11 CERALOCKr H: 15, 16, 47 L: 9, 13, 14, 48 CERALOCKr: CSTCR4M00G55-R0 C1=39pF (Typ.) C2=39pF (Typ.) 10 12 0.1F L 28 CERALOCKr H: 71 L: 30, 73 CERALOCKr: CSTLS8M00G53-B0 C1=15pF (Typ.) C2=15pF (Typ.) H 25 M38235G6HP 29 L V1 C1 C2 V2 V1 C1 C2 V2 s TMP19A43FDXBG (Toshiba) 32-bit Microcomputer Vcc=1.5V Vcc'=2.5V Vcc''=3.3V s MN103SFC2D (Panasonic) 32-bit Microcomputer Vdd=5.0V 4 H EVALUATION BOARD IC : TMP19A43FDXBG A14 CERALOCKr Xin: A14 Xout: A15 CERALOCKr: CSTCE10M0G52-R0 C1=10pF (Typ.) C2=10pF (Typ.) A15 GND 14 CERALOCKr IC : MN103SFC2D 13 Vdd2 10F L H: 9, 17, 34 L: 7, 15, 36 Vdd2: 16, 38 CERALOCKr: CSTCR5M00G55Z-R0 C1=39pF (Typ.) C2=39pF (Typ.) V1 C1 C2 V2 V1 C1 C2 V2 s MB95F128H (Fujitsu) 8-bit Microcomputer Vcc=5.0V s PIC16F716-I/SO (Microchip) 8-bit Microcomputer Vdd=5.0V H H EVALUATION BOARD IC : PIC16F716-I/SO(HS) L 16 1M CERALOCKr V1 C1 C2 V2 CERALOCKr: CSTCE12M0G52-R0 C1=10pF (Typ.) C2=10pF (Typ.) 15 GND IC : MB95F128H 56 CERALOCKr H: 3, 28, 51, 79 L: 4, 29, 54, 57 CERALOCKr: CSTCE8M00G52-R0 C1=10pF (Typ.) C2=10pF (Typ.) 55 V1 C1 C2 V2 Continued on the following page. 29 !Note * This PDF catalog is downloadedand !CAUTION (forMurata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our !Note * Please read rating from the website of storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. P16E.pdf 10.12.7 Application Circuits Utilization Continued from the preceding page. s HD64F36077GH (Renesas) 16-bit Microcomputer Vcc=5.0V s LC87F5G32A (Sanyo) 8-bit Microcomputer Vdd=5.0V 510 47000pF 10k H 26 H' H 10k 2 100pF IC : HD64F36077GH 11 CERALOCKr H: 3, 7, 12 L: 8, 9 CERALOCKr: CSTCE8M00G52-R0 C1=10pF (Typ.) C2=10pF (Typ.) 10 0.1F 6 L 6 IC : LC87F5G32A 7 2.2kF CERALOCKr V1 C1 C2 V2 10kF L' L H: 8, 19, 39 L: 5, 20, 40 H': 29, 31, 35 L': 30, 32~34, 36 CERALOCKr: CSTLS5M00G53-B0 C1=15pF (Typ.) C2=15pF (Typ.) V1 C1 C2 V2 s PD70F3215HYGC (Renesas) s ATmega128 (Atmel) 8-bit Microcomputer Vcc=5.0V 4 32-bit Microcomputer Vdd=5.0V H 14 IC : PD70F3215HYGC 12 CERALOCKr H: 1, 5, 9, 34, 70 L: 2, 8, 11, 33, 69 CERALOCKr: CSTCR5M00G55-R0 C1=39pF (Typ.) C2=39pF (Typ.) 13 10 10F L H IC : ATmega128 24 CERALOCKr H: 21, 52, 64 L: 22, 53, 63 CERALOCKr: CSTCE8M00G52-R0 C1=10pF (Typ.) C2=10pF (Typ.) 23 L V1 C1 C2 V2 V1 C1 C2 V2 s ST7FLITE29F2B6 (ST Microelectronics) 8-bit Microcomputer Vdd=5.0V s TMS320F2810PBKA (Texas Instruments) 32-bit Microcomputer Vdd1=1.8V Vdd2=3.3V H 18 H1 IC : ST7FLITE29F2B6 H2 IC : TMS320F2810PBKA L 58 100 H: 17 L: 16 CERALOCKr: CSTCE16M0V53-R0 C1=15pF (Typ.) C2=15pF (Typ.) CERALOCKr V1 C1 C2 V2 57 L 15 CERALOCKr 14 V1 C1 C2 V2 H1: 20, 29, 42, 56, 63, 74, 82, 94, 99, 100, 102, 110, 114 H2: 1, 13, 14, 25, 49, 52, 83, 104, 118 L: 12, 15, 17, 26, 30, 39, 53, 59, 62, 73, 88, 95, 103, 109, 115, 117, 128 CERALOCKr: CSTCE15M0V53-R0 C1=15pF (Typ.) C2=15pF (Typ.) 30 !Note * This PDF catalog is downloadedand !CAUTION (forMurata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our !Note * Please read rating from the website of storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. P16E.pdf 10.12.7 Ceramic Resonators (CERALOCKr) MHz Lead Type -Standard Frequency Tolerance for General Usage8.01.0 3.01.0 (3) (2) (1) s Features 1. Oscillation circuits do not require external load capacitors. There is some variation in built-in capacitance values applicable to various IC. 2. Stable over a wide temperature range. 3. Compact, lightweight and exhibit superior shock resistance performance. 4. Enable the design of oscillator circuits requiring no adjustment. 5. Cost-effective and reliable availability CSTLS_G 3.40-10.00MHz o0.480.05 : Weekly Date Code (in mm) T 1 MURATA's ceramic resonator, CERALOCK(R) with built-in load capacitors, has been widely applied as the most suitable component for clock oscillators in a broad range of microprocessors. The CSTLS series can be used in the design of oscillation circuits not requiring external load capacitors, enabling both high-density mounting and cost reduction. 0.7 (Ref.) 7.0 0.7 (Ref.) 2.50.2 2.50.2 5.51.0 (3) (2) (1) T 1 : 3.51.0 (16.00--32.99MHz) 3.01.0 (33.00--70.00MHz) 0.480.05 : EIAJ Monthly Code 3.50.3 6.50.5 3.50.3 5.50.5 5 s Applications 1. DTMF generators 2. Clock oscillators for microcomputers 3. Remote control units 4. Automated office equipment Oscillating Frequency (MHz) 3.40 to 10.00 16.00 to 70.00 Initial Tolerance 0.5% 0.5% CSTLS_X 16.00-70.00MHz 2.50.2 2.50.2 (in mm) Part Number CSTLS_G CSTLS_X Temperature Stability (%) 0.2 [-0.4% to +0.2%:Built-in Capacitance 47pF type] 0.2 Temperature Range (C) -20 to 80 -20 to 80 Irregular or stop oscillation may occur under unmatched circuit conditions. Please check the actual conditions prior to use. The order quantity should be an integral multiple of the "Minimum Quantity" shown in the packaging page. s Oscillation Frequency Measuring Circuit CSTLS_G/CSTLS_X VDD Rf To Frequency counter Rd (1) (3) C1 C2 (2) 31 !Note * This PDF catalog is downloadedand !CAUTION (forMurata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our !Note * Please read rating from the website of storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. P16E.pdf 10.12.7 s Oscillation Frequency Temperature Stability CSTLS_G W0.50 0.3 CSTLS_X 0.2 Oscillating Frequency Shift (%) Oscillating Frequency Shift (%) W0.25 0.1 0 Y40 0 40 80 120 Temperature (C) Y0.25 0.0 -50 -0.1 -0.2 -0.3 -30 -10 10 30 50 70 90 110 130 Temperature (C) Y0.50 5 32 !Note * This PDF catalog is downloadedand !CAUTION (forMurata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our !Note * Please read rating from the website of storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. P16E.pdf 10.12.7 Ceramic Resonators (CERALOCKr) kHz Chip Type -Standard Frequency Tolerance for General Usage7.50.3 3.30.3 MURATA's original package technologies have enabled the development of the kHz band CERALOCK(R). The series is perfect in miniature remote control units and AV modules. CERALOCK(R) can be reflow soldered and mounted by automatic placement equipment. 1.0 max. 8.50.3 2.00.5 0 -0.4 +0.1 1.10.1 0.90.1 0.15 max. 0.150.05 s Features 1. Withstands reflow soldering. 2. Compatible with automatic placement equipment. 3. No adjustment is necessary for oscillation circuits. CSBFB_J 430-519kHz 5.00.2 : EIAJ code (in mm) s Applications 1. Clock oscillators for microprocessors 2. OA equipment 3. AV modules 5.00.3 2.30.2 6.00.3 +0.1 0 -0.4 1.0 max. 2.00.5 0.80.2 0.70.2 0.15 max. 0.150.05 0.100.03 : EIAJ code (in mm) CSBFB_J 700-1250kHz 2.50.2 1.00.3 1.00.5 Part Number CSBFB_J Oscillating Frequency (kHz) 430 to 519, 700 to 1250 Initial Tolerance 0.5% Temperature Stability (%) 0.3 Temperature Range (C) -20 to 80 6 Irregular or stop oscillation may occur under unmatched circuit conditions. Please check the actual conditions prior to use. s Oscillation Frequency Measuring Circuit VDD s Oscillation Frequency Temperature Stability W0.5 Oscillating Frequency Shift (%) Rf To Frequency counter 0 Y40 0 40 80 120 Temperature (C) Rd CL1 CL2 Y0.5 Continued on the following page. 33 !Note * This PDF catalog is downloadedand !CAUTION (forMurata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our !Note * Please read rating from the website of storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. P16E.pdf 10.12.7 Continued from the preceding page. s Standard Land Pattern Dimensions CSBFB_J (430-519kHz) CSBFB_J (700-1250kHz) 2.0 0.5 1.7 3.3 1.7 1.5 1.0 (in mm) 1.5 3.0 0.5 (in mm) 6 34 !Note * This PDF catalog is downloadedand !CAUTION (forMurata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our !Note * Please read rating from the website of storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. P16E.pdf 10.12.7 Ceramic Resonators (CERALOCKr) kHz Lead Type -Standard Frequency Tolerance for General Usage7.90.3 3.60.3 s Features 1. Stable over a wide temperature range and with respect to long-term aging. 2. Fixed, tuned, solid-state devices 3. Miniature and lightweight 4. Exhibit excellent shock resistance performance. 5. Oscillating circuits requiring no adjustment can be designed by utilizing these resonators in conjunction with transistors or appropriate ICs. 5.00.2 1.80.3 CSBLA_E 375-429kHz 0.10.03 0.250.1 The CSBLA series ceramic resonators owe their development to MURATA's innovative expert technologies and the application of mass production techniques typically utilized in the manufacture of piezoelectric ceramic components. Because of their high mechanical Q and consistent high quality, the CSBLA series are ideally suited to microprocessor and remote control unit applications. 1.5 max. 0.80.1 1.10.1 4.30.5 9.30.3 : EIAJ code (in mm) 7.00.3 3.50.3 1.5 max. 1.750.5 1. Square-wave and sine-wave oscillators 2. Clock generator for microprocessors 3. Remote control systems CSBLA_E 430-509kHz 5.00.2 0.10.03 0.250.1 s Applications 0.80.1 1.10.1 3.50.5 9.00.3 : EIAJ code (in mm) 7.00.3 3.50.3 5.00.3 2.20.2 9.00.3 1.5 max. 1.5 max. 3.5.0.5 3.50.5 6.00.3 0.10.03 0.250.1 0.80.1 1.10.1 0.80.2 0.60.2 0.150.05 0.10.03 : EIAJ code 7 1.750.5 1.10.2 CSBLA_E 510-699kHz : EIAJ code (in mm) CSBLA_J 700-1250kHz 2.50.2 5.00.2 in mm Part Number CSBLA_E CSBLA_J Oscillating Frequency (kHz) 375 to 699 700 to 1250 Initial Tolerance 0.5% Temperature Stability (%) 0.3 0.3 Temperature Range (C) -20 to 80 -20 to 80 Irregular or stop oscillation may occur under unmatched circuit conditions. Please check the actual conditions prior to use. The order quantity should be an integral multiple of the "Minimum Quantity" shown in the packaging page. 35 !Note * This PDF catalog is downloadedand !CAUTION (forMurata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our !Note * Please read rating from the website of storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. P16E.pdf 10.12.7 s Oscillation Frequency Measuring Circuit VDD s Oscillation Frequency Temperature Stability W0.5 Oscillating Frequency Shift (%) Rf To Frequency counter 0 Y40 0 40 80 120 Temperature (C) Rd CL1 CL2 Y0.5 7 36 !Note * This PDF catalog is downloadedand !CAUTION (forMurata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our !Note * Please read rating from the website of storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. P16E.pdf 10.12.7 Notice for General Usage -MHz Chip Types Soldering and Mounting (CSTCC Series) 1. Soldering (1) Re-flow soldering Please mount component on a circuit board by re-flow soldering. Flow soldering is not acceptable. Recommendable Flux and Solder Flux Please use rosin based flux, but do not use water soluble flux. Please use solder (Sn-3.0Ag-0.5Cu) under the following condition. Standard thickness of soldering paste: 0.10 to 0.15mm Solder Recommendable Soldering Profile Pre-heating Heating Peak Temperature 150 to 180C 220C min. upper limit: 260C lower limit: 245C 60 to 120s 30 to 60s 5s max. Temperature (C) 1s max. 260 245 220 180 150 Pre-heating (150 to 180C) Peak Temperature shall be measured on the surface of component. Heating (220C min.) (2) Soldering with Iron Be compelled to mount component by using soldering iron, please do not directly touch the component with soldering iron. The terminals of component or electrical characteristics may be damaged if excess thermal stress is applied. Recommendable Soldering with Iron Heating of the soldering iron Watt Shape of the soldering iron Solering Time Solder 350C max. 30W max. o3mm max. 5s max. at one terminal Sn-3.0Ag-0.5Cu Gradual Cooling 60 to 120s 30 to 60s (3) Solder Volume Please make the solder volume less than the height of the substrate. When exceeding the substrate, the damage of adhesive for sealing between the metal cap and the substrate may occur. (4) etc. Do not reuse removed component from a circuit board after soldering. (5) Condition for Placement Machines The component is recommended with placement machines with employ optical placement capabilities. The component might be resulted in damage by excessive mechanical force. Please make sure that you have evaluated by using placement machines before going into mass production. Do not use placement machines which utilize mechanical positioning. Please contact Murata for details beforehand. Continued on the following page. 7 37 !Note * This PDF catalog is downloadedand !CAUTION (forMurata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our !Note * Please read rating from the website of storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. P16E.pdf 10.12.7 Notice for General Usage -MHz Chip TypeContinued from the preceding page. 2. Wash Some series do not withstand washing. Please check the list at right before use. (1) Cleaning Solvents HCFC, Isopropanol, Tap water, Demineralized water, Cleanthrough750H, Pine alpha 100S, Techno care FRW (2) Temperature Difference : dT *1 dTV60C (dT=Component-solvent) *1 ex. In case the component at +90C immerses into cleaning solvent at +60C, then dT=30C. (3) Conditions (a) Ultrasonic Wash 1 minute max. in above solvent at +60C max. (Frequency: 28kHz, Output: 20W/l) Series CSTCC (2.00 - 3.49MHz) CSTCC (3.50 - 3.99MHz) Wash Not Available Available (b) Immersion Wash 5 minutes max. in above solvent at +60C max. (c) Shower or Rinse Wash 5 minutes max. in above solvent at +60C max. (4) Drying 5 minutes max. by air blowing at +80C max. (5) Others (a) Total washing time should be within 10 minutes. (b) The component may be damaged if it is washed with chlorine, petroleum, or alkali cleaning solvent. 3. Coating Conformal coating of the component is acceptable. However, the resin material, curing temperature, and other process conditions should be evaluated to confirm stable electrical characteristics are maintained. 7 38 !Note * This PDF catalog is downloadedand !CAUTION (forMurata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our !Note * Please read rating from the website of storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. P16E.pdf 10.12.7 Notice for General Usage -MHz Chip Types Soldering and Mounting (CSTCR/CSTCE_V/CSTCG/CSTCE_G Series) 1. Soldering (1) Re-flow soldering Please mount component on a circuit board by re-flow soldering. Flow soldering is not acceptable. Recommendable Flux and Solder Flux Please use rosin based flux, but do not use water soluble flux. Please use solder (Sn-3.0Ag-0.5Cu) under the following condition. Standard thickness of soldering paste: 0.10 to 0.15mm Solder Recommendable Soldering Profile Pre-heating Heating Peak Temperature 150 to 180C 220C min. upper limit: 260C lower limit: 245C 60 to 120s 30 to 60s 5s max. Temperature (C) 1s max. 260 245 220 180 150 Pre-heating (150 to 180C) Peak Temperature shall be measured on the surface of component. Heating (220C min.) (2) Soldering with Iron Be compelled to mount component by using soldering iron, please do not directly touch the component with soldering iron. The terminals of component or electrical characteristics may be damaged if excess thermal stress is applied. Recommendable Soldering with Iron Heating of the soldering iron Watt Shape of the soldering iron Solering Time Solder 350C max. 30W max. o3mm max. 5s max. at one terminal Sn-3.0Ag-0.5Cu Gradual Cooling 60 to 120s 30 to 60s (3) Solder Volume Please make the solder volume less than the height of the substrate. When exceeding the substrate, the damage of adhesive for sealing between the metal cap and the substrate may occur. (4) etc. Do not reuse removed component from a circuit board after soldering. (5) Condition for Placement Machines The component is recommended with placement machines with employ optical placement capabilities. The component might be resulted in damage by excessive mechanical force. Please make sure that you have evaluated by using placement machines before going into mass production. Do not use placement machines which utilize mechanical positioning. Please contact Murata for details beforehand. 2. Washing / Coating Conformal coating or washing to the component is not acceptable, because it is not hermetically sealed. Please contact us in case you need washable component. Continued on the following page. 7 39 !Note * This PDF catalog is downloadedand !CAUTION (forMurata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our !Note * Please read rating from the website of storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. P16E.pdf 10.12.7 Notice for General Usage -MHz Chip TypeContinued from the preceding page. s Soldering and Mounting (CSACW/CSTCW Series) 1. Soldering (1) Re-flow soldering Please mount component on a circuit board by re-flow soldering. Flow soldering is not acceptable. Recommendable Flux and Solder Flux Please use rosin based flux, but do not use water soluble flux. Please use solder (Sn-3.0Ag-0.5Cu) under the following condition. Standard thickness of soldering paste: 0.10 to 0.15mm 260 245 220 180 150 Pre-heating (150 to 180C) Peak Temperature (C) Solder Heating (220C min.) Recommendable Soldering Profile Pre-heating Heating Peak Temperature 150 to 180C 220C min. upper limit: 260C lower limit: 245C 60 to 120s 30 to 60s 1s max. 5s max. Gradual Cooling 60 to 120s Temperature shall be measured on the surface of component. 30 to 60s (2) Soldering with Iron Be compelled to mount component by using soldering iron, please do not directly touch the component with soldering iron. The terminals of component or electrical characteristics may be damaged if excess thermal stress is applied. Recommendable Soldering with Iron Heating of the soldering iron Watt Shape of the soldering iron Solering Time Solder 350C max. 30W max. o3mm max. 5s max. at one terminal Sn-3.0Ag-0.5Cu 7 (3) etc. Do not reuse removed component from a circuit board after soldering. (4) Condition for Placement Machines The component is recommended with placement machines with employ optical placement capabilities. The component might be resulted in damage by excessive mechanical force. Please make sure that you have evaluated by using placement machines before going into mass production. Do not use placement machines which utilize mechanical positioning. Please contact Murata for details beforehand. 2. Washing / Coating Conformal coating or washing to the component is not acceptable, because it is not hermetically sealed. Please contact us in case you need washable component. 40 !Note * This PDF catalog is downloadedand !CAUTION (forMurata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our !Note * Please read rating from the website of storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. P16E.pdf 10.12.7 Notice for General Usage -MHz Chip Types Storage and Operating Conditions 1. Product Storage Condition Please store the products in a room where the temperature/humidity is stable, and avoid such places where there are large temperature changes. Please store the products under the following conditions: Temperature: -10 to + 40 degrees C Humidity: 15 to 85% R.H. 2. Expiration Date on Storage Expiration date (Shelf life) of the products is six months after delivery under the conditions of a sealed and unopened package. Please use the products within six months after delivery. If you store the products for a long time (more than six months), use carefully because the products may be degraded in solderability and/or rusty. Please confirm solderability and characteristics for the products regularly. 3. Notice on Product Storage (1) Please do not store the products in a chemical atmosphere (Acids, Alkali, Bases, Organic gas, Sulfides and so on), because the characteristics may be reduced in quality, and/or be degraded in the solderability due to the storage in a chemical atmosphere. (2) Please do not put the products directly on the floor without anything under them to avoid damp and/or dusty places. (3) Please do not store the products in places such as: in a damp heated place, in a place where direct sunlight comes in, in a place applying vibrations. (4) Please use the products immediately after the package is opened, because the characteristics may be reduced in quality, and/or be degraded in the solderability due to storage under the poor conditions. (5) Please do not drop the products to avoid cracking of ceramic elements. 4. Others Conformal coating or washing of the component is not acceptable because it is not hermetically sealed. Please be sure to consult with our sales representatives or engineers whenever and prior to using the products. s Rating The component may be damaged if excessive mechanical stress is applied. s Handling "CERALOCK" may stop oscillating or oscillate irregularly under improper circuit conditions. 7 41 !Note * This PDF catalog is downloadedand !CAUTION (forMurata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our !Note * Please read rating from the website of storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. P16E.pdf 10.12.7 Notice for General Usage -MHz Lead Types Soldering and Mounting The component cannot withstand washing. Please do not apply excessive mechanical stress to the component and lead terminals during soldering. s Storage and Operating Conditions 1. Product Storage Condition Please store the products in a room where the temperature/humidity is stable, and avoid such places where there are large temperature changes. Please store the products under the following conditions: Temperature: -10 to + 40 degrees C Humidity: 15 to 85% R.H. 2. Expiration Date on Storage Expiration date (Shelf life) of the products is six months after delivery under the conditions of a sealed and unopened package. Please use the products within six months after delivery. If you store the products for a long time (more than six months), use carefully because the products may be degraded in solderability and/or rusty. Please confirm solderability and characteristics for the products regularly. 3. Notice on Product Storage (1) Please do not store the products in a chemical atmosphere (Acids, Alkali, Bases, Organic gas, Sulfides and so on), because the characteristics may be reduced in quality, and/or be degraded in the solderability due to the storage in a chemical atmosphere. (2) Please do not put the products directly on the floor without anything under them to avoid damp and/or dusty places. (3) Please do not store the products in places such as: in a damp heated place, in a place where direct sunlight comes in, in a place applying vibrations. (4) Please use the products immediately after the package is opened, because the characteristics may be reduced in quality, and/or be degraded in the solderability due to storage under the poor conditions. (5) Please do not drop the products to avoid cracking of ceramic elements. 4. Others Conformal coating or washing of the component is not acceptable because it is not hermetically sealed. Please be sure to consult with our sales representatives or engineers whenever and prior to using the products. s Rating 7 The component may be damaged if excessive mechanical stress is applied. s Handling "CERALOCK" may stop oscillating or oscillate irregularly under improper circuit conditions. 42 !Note * This PDF catalog is downloadedand !CAUTION (forMurata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our !Note * Please read rating from the website of storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. P16E.pdf 10.12.7 Notice for General Usage -kHz Chip Types Soldering and Mounting CSBFB_J (430-519kHz/700-1250kHz) 1. Soldering Conditions (1) Reflow One heat stress, shown in the profile at right, is applied to the resonator, then after being placed in natural conditions for 1 hour, the resonator is measured. (a) Pre-heating conditions should be +150 to +180C for 60 to 120 seconds. Ascending time up +150C should be longer than 30 seconds. (b) Heating conditions should be within 40 seconds at +230C min., but peak temperature should be lower than +260C. (2) Soldering Iron Components shall be measured after soldering on PCB at +3505C for 3.00.5 seconds and leaving in natural condition for 24 hours. The soldering iron shall not touch the components while soldering. 2. Wash (1) Cleaning Solvents HCFC, Isopropanol, Tap water, Demineralized water, Cleanthrough750H, Pine alpha 100S, Techno care FRW (2) Temperature Difference : dT *1 dTV60C (dT=Component-solvent) *1 ex. In case the component at +90C immerses into cleaning solvent at +60C, then dT=30C. (3) Conditions (a) Ultrasonic Wash 1 minute max. in above solvent at +60C max. (Frequency: 28kHz, Output: 20W/l) Peak (260C max.) Temperature (C) 230 180 150 Heating (230C) Pre-heating (150-180C) Gradual Cooling 30 sec. min. 60-120 sec. 40 sec. max. 120 sec. min. (b) Immersion Wash 5 minutes max. in above solvent at +60C max. (c) Shower or Rinse Wash 5 minutes max. in above solvent at +60C max. (4) Drying 5 minutes max. by air blow at +80C max. (5) Others (a) Total washing time should be within 10 minutes. (b) The component may be damaged if it is washed with chlorine, petroleum, or alkali cleaning solvent. 7 (c) Ultrasonic cleaning of the component is acceptable. However, the size of bath, size and thickness of PCB should be evaluated to confirm stable electrical characteristics are maintained. 3. Notice for Mounting (a) Please ensure the component is thoroughly evaluated in your application circuit. (b) Please do not apply excessive mechanical stress to the component and lead terminals during soldering. (c) In the case of the bulk component, dry heating treatment (130C. for 5 hours min.) is required before reflow soldering. Then, the component should be soldered within 48 hours after dry heating treatment. 43 !Note * This PDF catalog is downloadedand !CAUTION (forMurata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our !Note * Please read rating from the website of storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. P16E.pdf 10.12.7 Notice for General Usage -kHz Chip Types Storage and Operating Conditions CSBFB_J 1. Product Storage Condition Please store the products in a room where the temperature/humidity is stable, and avoid such places where there are large temperature changes. Please store the products under the following conditions: Temperature: -10 to + 40 degrees C Humidity: 15 to 85% R.H. 2. Expiration Date on Storage Expiration date (Shelf life) of the products is six months after delivery under the conditions of a sealed and unopened package. Please use the products within six months after delivery. If you store the products for a long time (more than six months), use carefully because the products may be degraded in solderability and/or rusty. Please confirm solderability and characteristics for the products regularly. 3. Notice on Product Storage (1) Please do not store the products in a chemical atmosphere (Acids, Alkali, Bases, Organic gas, Sulfides and so on), because the characteristics may be reduced in quality, and/or be degraded in the solderability due to the storage in a chemical atmosphere. (2) Please do not put the products directly on the floor without anything under them to avoid damp and/or dusty places. (3) Please do not store the products in places such as: in a damp heated place, in a place where direct sunlight comes in, in a place applying vibrations. (4) Please use the products immediately after the package is opened, because the characteristics may be reduced in quality, and/or be degraded in the solderability due to storage under the poor conditions. (5) Please do not drop the products to avoid cracking of ceramic elements. 4. Others Conformal coating of the component is acceptable. However, the resin material, curing temperature, and other process conditions should be evaluated to confirm that stable electrical characteristics are maintained. Please be sure to consult with our sales representatives or engineers whenever and prior to using the products. s Rating The component may be damaged if excessive mechanical stress is applied. s Handling 7 "CERALOCK" may stop oscillating or oscillate irregularly under improper circuit conditions. 44 !Note * This PDF catalog is downloadedand !CAUTION (forMurata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our !Note * Please read rating from the website of storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. P16E.pdf 10.12.7 Notice for General Usage -kHz Lead Types Soldering and Mounting CSBLA_E The component cannot withstand washing. Please do not apply excessive mechanical stress to the component and lead terminals during soldering. s Soldering and Mounting CSBLA_J (1) Cleaning Solvents HCFC, Isopropanol, Tap water, Demineralized water, Cleanthrough750H, Pine alpha 100S, Techno care FRW. (2) Temperature Difference: dT *1 dT<=30 C. (dT=Component-solvent) *1 ex. In case the component at +90 degree C. immerses into cleaning solvent at +60 degree C., then dT=30 degree C. (3) Conditions 1. Ultrasonic Wash 1 minute max. in above solvent at +60 degree C. max. (Frequency: 28kHz, Output: 20W/L) 2. Immersion Wash 5 minutes max. in above solvent at +60 degree C. max. 3. Shower or Rinse Wash 5 minutes max. in above solvent at +60 degree C. max. (4) Drying 5 minutes max. by air blow at +80 degree C. max. (5) Others 1. Total washing time should be within 10 minutes. 2. Please ensure the component is thoroughly evaluated in your application circuit. 3. The component may be damaged if it is washed with alkali cleaning solvent. 4. Please do not apply excessive mechanical stress to the component and lead terminals during soldering. 5. Ultrasonic cleaning of the component is acceptable. However, the size of bath, size and thickness of PBC should be evaluated to confirm stable electrical characteristics are maintained. s Storage and Operating Conditions CSBLA_E 1. Product Storage Condition Please store the products in a room where the temperature/humidity is stable, and avoid such places where there are large temperature changes. Please store the products under the following conditions: Temperature: -10 to + 40 degrees C Humidity: 15 to 85% R.H. 2. Expiration Date on Storage Expiration date (Shelf life) of the products is six months after delivery under the conditions of a sealed and unopened package. Please use the products within six months after delivery. If you store the products for a long time (more than six months), use carefully because the products may be degraded in solderability and/or rusty. Please confirm solderability and characteristics for the products regularly. 3. Notice on Product Storage (1) Please do not store the products in a chemical atmosphere (Acids, Alkali, Bases, Organic gas, Sulfides and so on), because the characteristics may be reduced in quality, and/or be degraded in the solderability due to the storage in a chemical atmosphere. (2) Please do not put the products directly on the floor without anything under them to avoid damp and/or dusty places. (3) Please do not store the products in places such as: in a damp heated place, in a place where direct sunlight comes in, in a place applying vibrations. (4) Please use the products immediately after the package is opened, because the characteristics may be reduced in quality, and/or be degraded in the solderability due to storage under the poor conditions. (5) Please do not drop the products to avoid cracking of ceramic elements. 4. Others Conformal coating or washing of the component is not acceptable because it is not hermetically sealed. Please be sure to consult with our sales representatives or engineers whenever and prior to using the products. 7 45 !Note * This PDF catalog is downloadedand !CAUTION (forMurata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our !Note * Please read rating from the website of storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. P16E.pdf 10.12.7 Notice for General Usage -kHz Lead Types Storage and Operating Conditions CSBLA_J 1. Product Storage Condition Please store the products in a room where the temperature/humidity is stable, and avoid such places where there are large temperature changes. Please store the products under the following conditions: Temperature: -10 to + 40 degrees C Humidity: 15 to 85% R.H. 2. Expiration Date on Storage Expiration date (Shelf life) of the products is six months after delivery under the conditions of a sealed and unopened package. Please use the products within six months after delivery. If you store the products for a long time (more than six months), use carefully because the products may be degraded in solderability and/or rusty. Please confirm solderability and characteristics for the products regularly. 3. Notice on Product Storage (1) Please do not store the products in a chemical atmosphere (Acids, Alkali, Bases, Organic gas, Sulfides and so on), because the characteristics may be reduced in quality, and/or be degraded in the solderability due to the storage in a chemical atmosphere. (2) Please do not put the products directly on the floor without anything under them to avoid damp and/or dusty places. (3) Please do not store the products in places such as: in a damp heated place, in a place where direct sunlight comes in, in a place applying vibrations. (4) Please use the products immediately after the package is opened, because the characteristics may be reduced in quality, and/or be degraded in the solderability due to storage under the poor conditions. (5) Please do not drop the products to avoid cracking of ceramic elements. 4. Others Conformal coating of the component is acceptable. However, the resin material, curing temperature, and other process conditions should be evaluated to confirm that stable electrical characteristics are maintained. Please be sure to consult with our sales representatives or engineers whenever and prior to using the products. s Rating The component may be damaged if excessive mechanical stress is applied. s Handling 7 "CERALOCK" may stop oscillating or oscillate irregularly under improper circuit conditions. 46 !Note * This PDF catalog is downloadedand !CAUTION (forMurata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our !Note * Please read rating from the website of storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. P16E.pdf 10.12.7 Packaging for General Usage -MHz Chip Types Minimum Quantity Part Number Plastic Tape o180mm Plastic Tape o330mm Bulk Dimensions CSTCC_G CSTCR_G CSTCR_G15L CSTCE_G CSTCE_G15L CSTCE_V CSTCE_V13L CSTCG_V CSTCW_X CSTCW_X11 CSACW_X 2,000 3,000 3,000 3,000 3,000 3,000 3,000 3,000 3,000 3,000 3,000 6,000 9,000 9,000 9,000 9,000 9,000 9,000 9,000 9,000 9,000 9,000 500 500 500 500 500 500 500 500 500 500 500 a a a b b b b b b b b (pcs.) The order quantity should be an integral multiple of the "Minimum Quantity" shown above. c Dimensions of Reel a Trailer 160-190 Empty Components Leader Cover Film Empty 160 min. (o180 0 ) -1.5 400-560 Trailer 160-190 Empty Components b Leader Cover Film Empty 160 min. 400-560 (o180 0 ) -1.5 o13.00.2 2.00.5 o13.00.2 2.00.5 13.0 0 +1.0 9.0 -0 +1.0 17.01.0 13.01.0 (in mm) s Dimensions of Taping CSTCR_G15L 1.750.1 4.00.1 2.00.05 +0.1 o1.5 -0 4.00.1 2.00.05 CSTCE_G15L o1.5 +0.1 -0.0 1.750.1 5.50.05 12.00.2 3.50.05 4.00.1 +0.1 o1.5 -0 2.20.1 0.30.05 (1.85 max.) (3) 1.250.05 4.00.1 The cover film peel strength force 0.1 to 0.7N The cover film peel speed 300mm/min. o1.0 -0.0 1.50 -0.05 +0.10 +0.2 0.250.05 Cover Film 10 Direction of Feed (in mm) Direction of Feed Continued on the following page. (1.30 max.) 0.900.10 The cover film peel strength force 0.1 to 0.7N The cover film peel speed 300mm/min. Cover Film 10 (3) 3.40 -0.05 (3)(2)(1) (3)(2)(1) 4.70.1 (9.5) (5.2) 8.00.2 7 +0.10 (in mm) 47 !Note * This PDF catalog is downloadedand !CAUTION (forMurata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our !Note * Please read rating from the website of storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. P16E.pdf 10.12.7 Packaging for General Usage -MHz Chip TypeContinued from the preceding page. s Dimensions of Taping CSTCE_V13L 4.00.1 2.00.05 1.750.1 Dimensions of Carrier Tape o1.5 -0.0 +0.1 CSTCW_X11 4.00.1 2.00.1 o1.5 +0.1 -0.0 1.750.1 3.50.1 2.80.1 +0.2 o1.0-0.0 0.20.1 (3) t1 1 (1.85 max.) (in mm) 3.50.05 8.00.2 3.450.1 (3)(2)(1) (5.2) (5.5) 4.00.1 0.250.05 1.100.05 (3) (1.40 max.) 1.50 -0.05 The cover film peel strength force 0.1 to 0.7N The cover film peel speed 300mm/min. Cover Film 10 +0.10 10 Direction of Feed 1, 2: Dimensions vary with product thickness of CERALOCKr. Thickness of CERALOCKr t1 1 t2 2 1.40-1.20 1.480.1 2.1 max. 1.15-1.00 1.300.1 1.9 max. 0.95-0.90 1.120.1 1.7 max. Direction of Feed (in mm) (in mm) CSTCC_G 1.750.1 4.00.1 2.00.05 o1.550.05 4.00.1 2.00.05 CSTCR_G +0.1 o1.5 -0 1.750.1 5.50.05 12.00.2 (3) (2) (1) 5.50.05 (3)(2)(1) t1 1 t2 2 (3) 0.30.05 4.00.1 o1.5 +0.3 -0.0 The cover film peel strength force 0.1 to 0.7N 3.30.1 The cover film peel speed 300mm/min. Cover Film 10 4.00.1 +0.1 o1.5 -0 0.30.05 (3) Direction of Feed 1, 2: Dimensions vary with frequency range of CERALOCKr. 2.00-2.99MHz 3.00-3.99MHz Frequency Range 1.850.05 1.650.05 t1 1 2.45 max. 2.25 max. t2 2 (in mm) Direction of Feed CSTCE_G 1.750.1 4.00.1 2.00.05 o1.5 +0.1 -0.0 CSTCE_V 4.00.1 2.00.05 o1.5 -0.0 +0.1 3.50.05 8.00.2 3.50.05 1.750.1 Dimensions of Carrier Tape 1.250.05 2.20.1 The cover film peel strength force 0.1 to 0.7N The cover film peel speed 300mm/min. Cover Film 10 4.70.1 (9.5) 3.40 -0.05 (3)(2)(1) 4.00.1 The cover film peel strength force 0.1 to 0.7N The cover film peel speed 300mm/min. o1.0 -0.0 1.50 -0.05 +0.10 +0.2 4.00.1 0.250.05 (3) o1.0 +0.1 -0.0 +0.10 0.250.05 (1.30 max.) Cover Film 10 0.900.10 Direction of Feed (in mm) Direction of Feed (in mm) Continued on the following page. 48 1.100.05 (3) (1.40 max.) 1.50 -0.05 The cover film peel strength force 0.1 to 0.7N The cover film peel speed 300mm/min. Cover Film 10 3.450.1 (3)(2)(1) (5.2) (5.2) 7 8.00.2 +0.10 12.00.2 7.60.1 (9.5) t2 2 +0.1 o1.0 -0.0 The cover film peel strength force 0.1 to 0.7N The cover film peel speed 300mm/min. Cover Film 4.00.1 2.30.1 (3) 8.00.2 (2) (1) !Note * This PDF catalog is downloadedand !CAUTION (forMurata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our !Note * Please read rating from the website of storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. P16E.pdf 10.12.7 Packaging for General Usage -MHz Chip TypeContinued from the preceding page. s Dimensions of Taping CSTCG_V 4.00.1 2.00.05 1.750.1 o1.5 -0.0 +0.1 CSACW_X 4.00.1 2.00.1 +0.1 o1.5 -0.0 1.750.1 3.50.1 2.80.1 o1.0 +0.2 -0.0 (3) 8.00.2 3.50.05 8.00.2 (3) (2) (1) 2.20.05 (5.2) (5.5) 0.250.05 1.000.05 (3) (1.30 max.) 1.500.1 The cover film peel strength force 0.1 to 0.7N The cover film peel speed 300mm/min. Cover Film 10 10 Direction of Feed 1, 2: Dimensions vary with product thickness of CERALOCKr. Thickness of CERALOCKr t1 1 t2 2 1.40-1.20 1.480.1 2.1 max. 1.15-1.00 1.300.1 1.9 max. 0.95-0.90 1.120.1 1.7 max. Direction of Feed (in mm) CSTCW_X 4.00.1 2.00.1 o1.5 +0.1 -0.0 1.750.1 3.50.1 (3) (3) 10 Direction of Feed 1, 2: Dimensions vary with product thickness of CERALOCKr. Thickness of CERALOCKr t1 1 t2 2 1.40-1.20 1.480.1 2.1 max. 1.15-1.00 1.300.1 1.9 max. 0.95-0.90 1.120.1 1.7 max. t1 1 (in mm) t2 2 2.30.1 0.20.1 The cover film peel strength force 0.1 to 0.7N The cover film peel speed 300mm/min. Cover Film 4.00.1 2.80.1 (5.5) +0.2 o1.0-0.0 8.00.2 (2) (1) t1 1 (in mm) t2 2 4.00.1 o1.0 2.30.1 0.20.1 +0.1 -0.0 The cover film peel strength force 0.1 to 0.7N The cover film peel speed 300mm/min. Cover Film 4.00.1 7 49 !Note * This PDF catalog is downloadedand !CAUTION (forMurata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our !Note * Please read rating from the website of storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. P16E.pdf 10.12.7 Packaging for General Usage -MHz Lead Types Minimum Quantity Part Number Ammo Pack Bulk CSTLS_G (3.40 to 10.0MHz) CSTLS_X (16.00 to 70.00MHz) 2,000 2,000 500 500 (pcs.) The order quantity should be an integral multiple of the "Minimum Quantity" shown above. s Tape Dimensions of CSTLS_G P2 D M P dS dh dh M W2 d A W0 L1 W D0 P1 F1 F2 P0 Direction of Feed t Item Code Dimensions Tolerance W1 H0 H1 Remarks Width of diameter Height of resonator Dimensions of terminal Lead length under the hold down tape Pitch of component Pitch of sprocket hole Length from sprocket hole center to lead Length from sprocket hole center to component center Lead spacing (I) Lead spacing (II) Slant forward or backward Width of carrier tape Width of hold down tape Position of sprocket hole Gap of hold down tape and carrier tape Distance between the center of sprocket hole and lead stopper Total height of resonator Diameter of sprocket hole Total tape thickness Body tilt D A d L1 P P0 P1 P2 F1 F2 dh W W0 W1 W2 H0 H1 D0 t dS 8.0 5.5 o0.48 5.0 min. 12.7 12.7 3.85 6.35 2.5 2.5 0 18.0 6.0 min. 9.0 0 18.0 23.5 o4.0 0.6 0 1.0 0.5 0.05 - 0.5 0.2 0.5 0.5 0.2 0.2 1.0 0.5 - 0.5 W0.5 Y0 0.5 1.0 0.2 0.2 1.0 (in mm) Continued on the following page. Tolerance for Pitches 10xP0=1271 7 1mm max. Hold down tape does not exceed the carrier tape. 50 !Note * This PDF catalog is downloadedand !CAUTION (forMurata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our !Note * Please read rating from the website of storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. P16E.pdf 10.12.7 Packaging for General Usage -MHz Lead TypeContinued from the preceding page. s Tape Dimensions of CSTLS_X P2 D P dS dh dh A d W2 L1 W0 W D0 P1 F1 F2 P0 Direction of Feed t Item Code Dimensions Tolerance W1 H0 H1 Remarks Width of diameter Height of resonator Dimensions of terminal Lead length under the hold down tape Pitch of component Pitch of sprocket hole Length from sprocket hole center to lead Length from sprocket hole center to component center Lead spacing (I) Lead spacing (II) Slant forward or backward Width of carrier tape Width of hold down tape Position of sprocket hole Gap of hold down tape and carrier tape Distance between the center of sprocket hole and lead stopper Total height of resonator Diameter of sprocket hole Total tape thickness Body tilt D A d L1 P P0 P1 P2 F1 F2 dh W W0 W1 W2 H0 H1 D0 t dS 5.5 6.5 o0.48 5.0 min. 12.7 12.7 3.85 6.35 2.5 2.5 0 18.0 6.0 min. 9.0 0 18.0 24.5 o4.0 0.6 0 1.0 0.5 0.05 - 0.5 0.2 0.5 0.5 0.2 0.2 1.0 0.5 - 0.5 W0.5 Y0.0 Tolerance for Pitches 10xP0=1271 1mm max. Hold down tape does not exceed the carrier tape. 7 0.5 1.0 0.2 0.2 1.0 (in mm) 51 !Note * This PDF catalog is downloadedand !CAUTION (forMurata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our !Note * Please read rating from the website of storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. P16E.pdf 10.12.7 Packaging for General Usage -kHz Types CSBFB Series Minimum Quantity Part Number Plastic Tape o330mm Bulk CSBFB_J (430 to 519kHz) CSBFB_J (700 to 1250kHz) 1,500 3,000 500 1,000 (pcs.) The order quantity should be an integral multiple of the "Minimum Quantity" shown above. c Dimensions of Reel o13.00.2 17.50.5 21.51.0 (o3302.0) (o801.0) 2.00.5 (in mm) s Dimensions of Taping CSBFB_J 430-519kHz 1.750.1 4.00.1 2.00.1 o1.50.1 4.00.1 2.00.1 o1.50.15 CSBFB_J 700-1250kHz 1.750.15 7.50.1 7.50.1 16.00.3 13.30.1 12.00.1 (4.6 max.) 3.50.1 The cover film peel strength force 0.1 to 0.7N The cover film peel speed 300mm/min. Cover Film 10 8.050.1 (3) t0.3 The cover film peel strength force 0.1 to 0.7N The cover film peel speed 300mm/min. Cover Film 10 8.00.1 2.70.1 5.450.1 (3) t0.3 (3.07 max.) (in mm) Direction of Feed (in mm) Direction of Feed 7 s CSBLA Series Minimum Quantity Part Number Bulk CSBLA_E CSBLA_J The order quantity should be an integral multiple of the "Minimum Quantity" shown above. 500 1,000 (pcs.) 52 8.80.1 16.00.15 13.30.1 11.40.1 !Note * This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. P16E.pdf 10.12.7 |
Price & Availability of CSTCE8M00G55A-R0
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |